In the last article, I showed you how to get your Mac ready to develop Orx by downloading the Xcode Commandline Developer Tools which gives you
gcc and a MacOSX SDK.
git is the tool that we will use to clone (or download) the latest repo of the Orx library.
$ git clone https://github.com/orx/orx.git
This will show the cloning process to your hard drive:
Cloning into 'orx'... remote: Counting objects: 73959, done. remote: Total 73959 (delta 0), reused 0 (delta 0), pack-reused 73959 Receiving objects: 100% (73959/73959), 58.93 MiB | 87.00 KiB/s, done. Resolving deltas: 100% (54159/54159), done. ~Documents$
The Orx library source code is now on your Mac.
The next step is to run the setup script which will do three things for you automatically:
~Documents$ cd orx/ orx$ ./setup.sh
You will get the following output:
== Checking version: [ extern/ ] == [ d99b8c61d781 ] needed, current [ ] == [ d99b8c61d781 ] not in cache == Fetching [ https://bitbucket.org/orx/orx-extern/get/d99b8c61d781.zip ] == Please wait! == [ d99b8c61d781 ] cached! == Decompressing [ cache/d99b8c61d781.zip ] => [ extern/ ] == [ d99b8c61d781 ] installed! == Copying [ premake4 ] to [ code/build ] == Copying [ premake4 ] to [ tutorial/build ] == Copying [ premake4 ] to [ tools/orxFontGen/build ] == Copying [ premake4 ] to [ tools/orxCrypt/build ]
The external dependencies are downloaded and unpacked into your orx/extern folder.
premake4 is copied to several folders which will be explained in a moment.
Next, the script sets a very handy environment variable ($ORX) on your system. This will have many uses for when you come to create your own game projects, but this is covered in the next article. But you will see output of:
== Setting environment: [ ORX = /Users/Someone/Documents/orx/code ]
The third step of the script is to create all the Projects for many IDEs availble for the Mac.
premake4 is the tool that the script uses to create them, and the output will look like:
== Generating build files for [ mac ] == Generating [ gmake ] Building configurations... Running action 'gmake'... Generating mac/gmake/Makefile... Generating mac/gmake/orx.make... Generating mac/gmake/orxLIB.make... Generating mac/gmake/Bounce.make... Done. Building configurations... Running action 'gmake'... Generating mac/gmake/Makefile... Generating mac/gmake/01_Object.make... ... >8 snip!... Generating mac/gmake/12_Lighting.make... Done. Building configurations... Running action 'gmake'... Generating mac/gmake/Makefile... Generating mac/gmake/orxFontGen.make... Done. Building configurations... Running action 'gmake'... Generating mac/gmake/Makefile... Generating mac/gmake/orxCrypt.make... Done. == Generating [ codelite ] Building configurations... Running action 'codelite'... Generating mac/codelite/orx.workspace... Generating mac/codelite/orx.project... Generating mac/codelite/orxLIB.project... ...etc... Done. == You can now build orx in [ code/build/mac ] == Installing git hook [ post-checkout ] == Installing git hook [ post-merge ] == IMPORTANT - New environment detected: Please logout/login to refresh your environment if you're using an IDE. == [ 0:14:58 ] Setup successful!
We now have everything in place to actually build the Orx library.
Please note the message above that says:
== IMPORTANT - New environment detected: Please logout/login to refresh your environment if you're using an IDE.
Just close your Terminal and open a new one so that Orx settings are available during Terminal sessions.
Notice in the output above, Solution Projects have been created for gmake, Codelite, Code::Blocks and Xcode.
If you would rather compile using Xcode than gmake, follow this tutorial: Building the Orx Library with Xcode on Mac OS X
If you would rather compile using Codelite than gmake, follow this tutorial: Building the Orx library on a Mac with Codelite
As we are setting up without
Xcode, let's use
gmake as our method to build Orx as it is available to everyone (if you followed the first article).
$ cd ~/Documents/orx/code/build/mac/gmake/
Then build the Debug version of the Orx library with:
$ make config=debug64
The output will look like this:
==== Building orxLIB (debug64) ==== Creating obj/x64/Debug/orxLIB orxPlugin_EmbeddedList.cpp orxAnim.c orxAnimPointer.c orxAnimSet.c ... >8 snip .... orxString.c orxTree.c Linking orxLIB ld: warning: directory not found for option '-L/usr/lib64' Running post-build commands cp -f ../../../lib/dynamic/liborx*.dylib ../../../bin ==== Building orx (debug64) ==== Creating obj/x64/Debug/orx orxMain.c Linking orx ld: warning: directory not found for option '-L/usr/lib64' ==== Building Bounce (debug64) ==== Creating obj/x64/Debug/Bounce orxBounce.c Linking Bounce ld: warning: directory not found for option '-L/usr/lib64'
Next, create the Profile version of the library with:
$ make config=profile64
And finally, the Release version of the library with:
$ make config=release64
These are saved to the
orx/code/libs/dynamic folder. Use finder to take a look at the output:
You can see the
liborxd.dylib and the
Well done. You have compiled the Orx library which can now be used in your own game projects.
Now we are ready to make a game project of our own.
Just a little note on the $ORX environment variable that the
setup.sh script created for you: if you open the
.profile files in your
~ folder, you will see the
ORX variable set there for you.